Tanica
EverCrete® Pavishield
Sredstvo Pavishield® zagotavlja posebno zaščito proti propadanju betonskih industrijskih tal. Sestava na osnovi vodnega stekla in posebnega katalizatorja omogoča, da izdelek prodre globoko v beton, zapre pore ter ustvari trajno pregrado. Sredstvo Pavishield® je primerno za vse vrste tlaka, dovoze ter steze iz svežega in zrelega betona.

Prorpieta
Lastnosti
  • Sredstvo Pavishield® predstavlja trajni premaz, ki izboljša notranjo strukturo industrijskih betonskih tlakov in njihovo odpornost proti obrabi.
  • Neguje in ščiti betonska tla že nemudoma po nanosu ter učinkuje proti izparevanju in tako deluje kot sredstvo proti hitremu izsuševanju. Tako zmanjša in preprečuje nastajanje razpok zaradi krčenja ob prehitrem sušenju.
  • Trajno preprečuje nastajanje prahu in odlično utrjuje prašne talne površine.
  • Pavishield® je popolna podlaga za morebitno nadaljnjo površinsko obdelavo.
  • Ustvarja trajno pregrado proti vpijanju vode, kislin, olj, maščob in drugih škodljivih snovi.
  • Pavishield® je brezbarven in ne spreminja originalnega izgleda betonske površine, hkrati pa odlično utrjuje površine in tako dolgoročno poveča trdnost podlage in odpornost površine na abrazijo.
  • Tlakovane površine ščiti pred poškodbami zaradi zmrzovanja in odtajevanja s talilnimi solmi.
  • Zagotavlja izjemno odpornost betona na kemične vplive, preprečuje karbonizacijo in povzroči boljšo odpornost na obrabo.
  • Odlično utrjuje površine in je dokazano popolna osnova za nadaljnje premaze, ker izboljša oprijem lepil, smol in lakov.
  • Zveča odpornost proti obrabi in vremenskim vplivom.
  • Pavishield® je trajno in učinkovito sredstvo, popolnoma neškodljivo in varno za ljudi in okolje.


Rivestimenti
Excellent base for subsequent coatings
EverCrete® Pavishield is colorless and preserves the original look of concrete floors. Scientific tests have shown that it is an ideal foundation for further processing such as the application of glues, resins or paints, to improve adhesion. It also increases the compressive strength and surface abrasion.


Uporaba
  • Na novih in starejših betonskih industrijskih tleh.
  • Za notranje in zunanje tlakovane površine.
  • Na dovozih in stezah.
  • Na pločnikih.
  • Na vzletno–pristajalnih stezah.
  • Na športnih stezah.
  • V kleteh.
  • V hlevih.


Prednosti

EverCrete® Pavishield je ekonomičen in cenovno ugoden; z 1 litrom prekrijemo do 8 kvadratnih metrov površine.
economical
EverCrete® Pavishield lahko nanesemo s pršilko z nizkim tlakom, valjem ali čopičem.
easy
EverCrete® Pavishield je okolju prijazen in popolnoma neškodljiv.
environmentally friendly

Posa
Applications
The product should be applied in two coats with a low pressure pump. The surface needs to be perfectly clean, free from residues of oil and grease.
Start from step 3 in the case of a fresh cast.
On cured casts (aged over 3 months):
1. The floor should be clean and wet thoroughly before application. Wash with a floor washer or power washer.
2. Wait until the surface is dry (from 6 to 24 hours).
3. Stir the product thoroughly before use.
4. Evenly apply the first coat of the product, moistening the entire surface.
5. Wait until the first coat has been absorbed.
6. Apply the second coat going cross (i.e. if the first coat was applied in the east-west direction, apply the second coat in a north-south direction) .
7. Rinse the floor within 12 hours from the first coat, to remove all product in excess, using a floor washer or other systems.



In opera 1
EverCrete® Pavishield protects industrial indoor floors
In opera 2
EverCrete® Pavishield protects industrial outdoor floors
In opera 3
EverCrete® Pavishield protects concrete from deterioration
In opera 4
EverCrete® Pavishield is certified for use in contact with food

Specifications
Composition Proprietary blend of aqueous waterglass
Expiry 12 months if stored sealed
Flammability None flammable
Environmental risk None
Organic properties Colorless, odorless liquid
Storage Store frost free and keep tightly sealed
Toxicity None
Curing 36 days. Traffic after a few hours
Yield per liter 6-8 sqm
Warning Keep away from glass and aluminum


Performance
Properties Result Reference standard
Freeze/thaw resistance 300 cycles without damage UNI 7087/72
Resistance to deicing salts Excellent UNI 7087/72
Compression surface resistance Average increase of 30%
Abrasion resistance 100% increase Method ORF
Penetration depth Up to 34 mm
Adhesion to binders, resins, paints Improved AMA-83 Sweden
Efflorescence susceptibility None
Absorption of oils and grease 67% reduction
Anti-evaporation Excellent results ASTM C-309-74

*For complete information please request TDS (Technical Data Sheet)
Join us on Facebook Join us on Youtube Follow us on Twitter
Ta stran uporablja piškotke. Za več informacij preberite pravilnik o zasebnosti.
Z zaprtjem to pasico soglašate z uporabo piškotkov Zaprite banner